A Unified Approach to Local Quantum Uncertainty and Interferometric Power by Metric Adjusted Skew Information

Local quantum uncertainty and interferometric power were introduced by Girolami et al. as geometric quantifiers of quantum correlations. The aim of the present paper is to discuss their properties in a unified manner by means of the metric adjusted skew information defined by Hansen.     

Miniaturized matrix solid-phase dispersion and solid-phase clear-up combined with capillary electrophoresis for efficient determination of trace bioactive components in complicated sample matrix: Take Wubi Shanyao Pill as an example

Accurate quantitative analysis of trace analytes in a complicated matrix is a challenge in modern analytical chemistry. An appropriate analytical method is considered to be one of the most common gaps during the whole process. In this study, a green and efficient strategy based on miniaturized matrix solid-phase dispersion and solid-phase extraction combined with capillary electrophoresis was first proposed for extracting, purifying and determining target analytes from complicated matrix, using Wubi Shanyao Pill as an example. In detail, 60 mg of samples were dispersed on MCM-48 to obtain high yields of analytes, then the extract was purified with a solid-phase extraction cartridge. Finally, four analytes in the purified sample solution were determined by capillary electrophoresis. The parameters affecting the extraction efficiency of matrix solid-phase dispersion, purification efficiency of solid-phase extraction and separation effect of capillary electrophoresis were investigated. Under the optimized conditions, all analytes demonstrated satisfactory linearity (R²>0.9983). What's more, the superior green potential of the developed method for the determination of complex samples was confirmed by the Analytical GREEnness Metric Approach. The established method was successfully applied in the accurate determination of target analytes in Wubi Shanyao Pill and thus provided reliable, sensitive, and efficient strategy support for its quality control.     

Matrix solid-phase dispersion combined with micro-fractionation bioactivity evaluation screening polymethoxylated flavones from Citrus peels

Polymethoxyflavones were a unique class of natural and safe flavonoids containing two or more methoxy groups, which were also the most abundant edible part in Citrus peel. The optimum condition in the process of selective extraction of polymethoxylated flavones from Citrus peel by matrix solid-phase dispersion (MSPD) was as follows: SBA-15 as adsorbent, ethyl acetate as eluent, the mass ratio of adsorbent to sample 1:1, and the mixture of sample and adsorbent was ground for 3 min. Twelve antioxidants were successfully screened by micro-fractionation bioactivity evaluation assay, in which four of them were flavonoid glycosides, seven of them were polymethoxylated flavones, and one was phenylpropanoid. 1-sinapoly-β-D-glucopyranoside (1) was reported for the first time in Citrus peel. And antioxidant capacity of 1-sinapoly-β-D-glucopyranoside, 5, 7, 8, 3′, 4′, 5′-hexamethoxyflavone (6), hexamethoxyflavone (11), and 5, 6, 7, 4′-tetramethoxyflavone (7) were reported for the first time. Nobiletin (compound 8), 3, 5, 6, 7, 8, 3′, 4′-heptamethoxyflavone (9) and tangeretin (10) were isolated and purified by countercurrent chromatography combined with preparative liquid chromatography. Antioxidant activity evaluation indicated that the three isolated polymethoxylated flavones owned similar antioxidant activity. This study indicated that MSPD combined with micro-fractionation bioactive evaluation was efficient in screening bioactive compounds for rapid extraction and effective pinpointing bioactive substances in natural products.     

Simultaneous determination of naphazoline and pyridoxine in eye drops using excitation–emission matrix fluorescence coupled with second-order calibration method based on alternating trilinear decomposition algorithm

A novel method is developed for the direct determination of naphazoline hydrochloride(NAP) and pyridoxine hydrochloride(VB6) in commercial eye drops. By using excitation–emission matrix(EEM)fluorescence coupled with second-order calibration method based on the alternating trilinear decomposition(ATLD) algorithm, the proposed approach can achieve quantitative analysis successfully even in the presence of unknown and uncalibrated interferences. The method shows good linearity for NAP and VB6 with correlation coefficients greater than 0.99. The results were in good agreement with the labeled contents. To further confirm the feasibility and reliability of the proposed method, the same batch samples were analyzed by multiple reaction monitoring(MRM) based on LC–MS/MS method.T-test demonstrated that there are no significant differences between the prediction results of the two methods. The satisfactory results obtained in this work indicate that the use of the second-order calibration method coupled with the EEM is a promising tool for industrial quality control and pharmaceutical analysis due to its advantages of high sensitivity, low-cost and simple implementation.     

Environmental effects on fibre reinforced polymeric composites: Evolving reasons and remarks on interfacial strength and stability

The interface between fibre and matrix of fibrous polymeric composites is most critical and decisive in maintaining sustainability, durability and also reliability of this potential material, but unfortunately a comprehensive conclusion is yet to meet the label of confidence for the engineering viability. Fiber reinforced polymer (FRP) composites are being accepted and also utilized as better and reliable alternative materials for repairing and/or replacing conventional materials, starting from tiny objects to mega structure in various engineering applications. The promise and potential of these materials are sometimes threatened in speedy replacement of conventional materials because of their inhomogeneities and inherent susceptibility to degradation due to moist and thermal environments. Environmental conditioning is traditionally believed to be a physical phenomenon but present literature has revealed that the interdiffusion between fiber and polymer matrix resin comprises of physical, chemical, mechanical, physico-chemical and mechano-chemical phenomena. The failure and fracture behavior at ambient conditions itself is a complex phenomenon till at present. The service conditions which are mostly hygrothermal in nature, along with a variation of applied loads make the mechanical behavior nearly unpredictable, far off from conclusions in evaluating the short term as well as long term durability and reliability of FRPs. It is essential to accurately simulate the initial and subsequent evolution process of this kind of damage phenomena, in order to explore the full potential of the mechanical properties of composite laminates. The present review has emphasized the need of complying scattered as well as limited literature on this front, and has focused on creating the urgency to highlight the importance of judicious uses of these materials with minimum safety factors with an aim to achieving lighter weight in enhancing specific properties.     

Tutorial review on validation of liquid chromatography–mass spectrometry methods: Part I

This is the part I of a tutorial review intending to give an overview of the state of the art of method validation in liquid chromatography mass spectrometry (LC–MS) and discuss specific issues that arise with MS (and MS/MS) detection in LC (as opposed to the “conventional” detectors). The Part I briefly introduces the principles of operation of LC–MS (emphasizing the aspects important from the validation point of view, in particular the ionization process and ionization suppression/enhancement); reviews the main validation guideline documents and discusses in detail the following performance parameters: selectivity/specificity/identity, ruggedness/robustness, limit of detection, limit of quantification, decision limit and detection capability. With every method performance characteristic its essence and terminology are addressed, the current status of treating it is reviewed and recommendations are given, how to determine it, specifically in the case of LC–MS methods.     

High‐temperature superconductivity and long‐range order in strongly correlated electronic systems

A selective review of the question of how repulsive electron correlations might give rise to off‐diagonal long‐range order (ODLRO) in high‐temperature superconductors is presented. The article makes detailed explanations of the relevance to superconductivity of reduced electronic density matrices and how these can be used to understand whether ODLRO might arise from Coulombic repulsions in strongly correlated electronic systems. Time‐reversed electron pairs on alternant Cuprate and the iron‐based pnictide and chalcogenide lattices may have a weak long‐range attractive tail and much stronger short‐range repulsive Coulomb interaction. The long‐range attractive tail may find its origin in one of the many suggested proposals for high‐T_c superconductivity and thus has an uncertain origin. A phenomenological Hamiltonian is invoked whose model parameters are obtained by fitting to experimental data. A detailed summary is given of the arguments that such interacting electrons can cooperate to produce a superconducting state in which time‐reversed pairs of electrons effectively avoid the repulsive hard‐core of the Coulomb interaction but reside on average in the attractive well of the long‐range potential. Thus, the pairing of electrons itself provides an enhanced screening mechanism. The alternant lattice structure is the key to achieving robust high‐temperature superconductivity with dx²‐y² or sign alternating s‐wave or s± condensate symmetries in cuprates and iron‐based compounds. Some attention is also given to the question first raised by Leggett as to where the Coulombic energy is saved in the superconducting transition in cuprates. A mean‐field‐type model in which the condensate density serves as an order parameter is discussed. Many of the observed trends in the thermal properties of cuprate superconductors are reproduced giving strong support for the proposed model for high‐temperature superconductivity in such strongly correlated electronic systems. © 2015 Wiley Periodicals, Inc.